Products and ServicesProducts and ServicesContact UsAbout UsHome




Products

Special FX Firing Systems

Exploders & Blasting Accessories

Cave / Mine Lighting

Laser Heads

Laser Display Systems

– Initiators for Electric Detonators and Shock Tube –

Two manual initiators for use with Electric Detonators and Shock Tube.

Solid state electronics provide superb reliability in these compact units, tested to 5000 firings. These initiators are housed in an solid plastic enclosure with a protective rubber case and operate from just 2 x AA alkaline cells.

The electric detonator version also has an in built basic ohm meter that gives resistance bands of the firing circuit: 0-5, 6-10, 11-20 and 21-30 ohms.

Both initiators can be badged to suit company requirements.

Manual Shock Tube InitiatorKey Features Shock Tube -

  • Discharge energy - 0.6J @ 2.3kV
  • Charge time - 1 to 2s, depending on battery condition
  • Shock tube electrode fitting is compatible with Dyno Nobel tips
  • Very compact size
  • Low battery indicator
  • User replaceable batteries (2 x AA) - easily obtainable
  • Over 1000 charge and fire cycles per battery set
  • Supplied with 2 sets of batteries, and 2 shock tube electrodes
  • Designed and tested to EN:13763-26:2004
  • Optional Peli storage case

Key Features Electric Detonator -

  • Discharge energy - 1.13J @ 150V
  • Charge time - 2 to 4s, depending on battery condition
  • Screw down connection terminals
  • Very compact size
  • Low battery indicator
  • User replaceable batteries (2 x AA) - easily obtainable
  • Over 300 charge and fire cycles per battery set
  • Supplied with 2 sets of batteries
  • Designed and tested to EN:13763-26:2004
  • Optional Peli storage case

For more information, please use the email address shown in contact.